Leaks at drains, seams and flashings on your flat or low-slope roof, found and fixed right. Soprema SBS systems, honest advice and no pressure to re-roof.
Preview only. On the live page this goes straight to Murat.
Flat roofs almost never fail across the whole field. It is the drains, seams and flashings that leak. Here is what we find most across the Lower Mainland.
Water pools at the drain and works in between the plies. We cut it out, set a proper drain and patch it two-ply so it stops for good.
As the membrane ages the seams lift and blister, letting water track underneath. We re-seal or re-membrane the failed areas.
Pipe boots, vents and curbs are where flat roofs leak most. We re-flash them properly instead of just caulking.
Standing water that never drains breaks the membrane down early. We correct the drainage and the slope where we can.
Open or loose coping on the parapet wall lets water in behind the membrane. We re-fasten and seal it.
When the cap sheet loses its granules it bakes in the sun and cracks. We catch it before it turns into a leak.
We get up on the roof and find why it is leaking, not just where the stain is.
Repair or replace, you get a straight answer and a clear price. No pressure.
Matching tiles, lead flashings and fixed underlayment, done the right way.
We clean up after ourselves and stand behind the work we do.
Real jobs from across the Lower Mainland. The full story behind each one is on our blog.
If a repair will do, we tell you. We do not upsell roofs people do not need.
Torch-on and flat roofs are what we do most. We install Soprema SBS systems and know exactly where they fail.
Licensed, insured with $2M liability, and WCB coverage with safety-trained crews.
We show you what is actually happening on your roof and explain it plainly.
Based in Aldergrove and on the road across the Lower Mainland every day, so we can get out fast for an inspection.
Usually, yes. Flat roof leaks are almost always at the drains, seams or flashings, not across the whole roof. We fix the failure point and only recommend replacement when the membrane is truly at the end of its life.
A well-installed two-ply SBS roof lasts around 20 to 30 years. A full Soprema install comes with a 20-year manufacturer warranty.
Usually because the last repair only sealed the surface. Water can travel a long way under a flat roof before it shows inside, so we trace it back to the real entry point instead of just patching the stain.
Both, and most of our flat roof work is repairs. We will always tell you honestly whether a repair will hold or it is time to re-roof.
It is a modified-bitumen membrane installed in two plies, a base sheet and a granulated cap sheet, for flat and low-slope roofs. It is one of the most reliable systems for our wet coast climate.
All of Greater Vancouver and the Fraser Valley, including Vancouver, Burnaby, Coquitlam, Surrey, Langley, Abbotsford and more.
Book a free, no-obligation inspection. Honest advice, fast response.
